| Home | Contact Us | Careers |  
 

Introduction
GV-AS1010 is a single door controller with built-in reader. It provides TCP/IP communication interface to PC and also supports the time & attendance function in GV-ASManager, an access control and management software. It is possible to add two more card readers to GV-AS1010 for entry and exit applications. GV-AS1010 has the capability to store up to 40,000 cards when connected to GV-ASManager. Programming of the GV-AS1010 can be done either on the keypad or from the GV-ASManager. GV-AS1010 is suitable for controlling doors, parking gates and access to elevator call buttons.
  • Features
  • Specifications
  • Options
  • Packing List
  • Video
  • Download

  • 1 door (one-way and two-way control)
  • 1,000 / 40,000 cards (standalone / networked mode)
  • Easy programming from keypad
  • Function keys on keypad to register attendance data for GV-TAWeb
  • Built-in 3 digital inputs and 2 relay outputs
  • 1 RS-485 interface for connecting to up to 2 readers
  • 1 network interface for connection with GV-ASManager and TCP/IP reader
  • Built-in 13.56 MHz Reader
  • Built-in tampering alarm sensor
  • Anti-Passback (APB) support
Connection
Function Keys
Before employees present their access card to GV-AS1010, they can press the function keys to indicate it is the start or end of Work Time, Away, Overtime, Break Time or Job Code. You can look up the attendance data in GV-TAWeb, the time and attendance system in GV-ASManager.

System Requirements
GV-ASManager Version
Hardware
CPU 32-bit ARM7TDMI
Number of User Cards
Frequency
Event Buffer 65,536 events and log data
Power 100 ~ 240V AC, 50 ~ 60Hz
RS-485 Interface 1 RS-485 interface for GV-Readers and GV-GF Fingerprint Readers (max. 2 readers)
TCP/IP Interface 1 TCP/IP interface for GV-CR420 and GV-GF1921 / 1922
Communication Protocol TCP/IP
Digital I/O Input 3 inputs, dry contact, NO / NC
Output 2 relay outputs (30V DC, 5A; 110V AC ~ 250V AC, 5A )
Function Keys on Keypad Yes
Supported ID Formats Built-in reader reads both GID and UID
Operating Temperature 0 ~ 65°C / 32 ~ 149°F
Operating Humidity 10% ~ 90% RH (non-condensing)
Dimension (W x H x T) 96 x 137 x 27 mm / 3.78 x 5.39 x 1.06 in
Weight 250 g / 0.55 lb
Ingress Protection IP54
Certification CE, FCC, RoHS

Note:
  1. GV‐AS1010 does not support 3rd party access control software and 3rd party readers.
  2. GV‐AS1010 is a controller with a built‐in card reader. GV‐AS1010 cannot be used as an independent card reader.
  3. If you are using third‐party cards or key fobs, the reader must be under UID mode.
  4. Specifications are subject to change without notice.
Optional devices can expand the capabilities and versatilities of your GV-AS Controllers. Consult your sales representative for more information.

  • GV-AS1010
  • Power Adaptor 12V DC / 1.25A
  • Screw x 3
  • Screw Anchor x 2
  • Enroll Card
  • Delete Card
  • GV-AS ID F Card x 20
  • Torx Wrench
  • Software CD
  • Warranty Card

Using Function Keys of GV-AS1010 to Register Attendance Data
 
Connecting GV-AS Controller to GV-Reader via TCP/IP
 
Installing GV-AS1010
 

 
Firmware  
Software Download & Upgrading  
Version History  
Comparison Table pdf
Quick Start Guide zip
User's Manual zip
Datasheet pdf

Item No. (Sales Part No.) Description
{item} {Des}

  © 2015 GeoVision Inc. All Right Reserved. Warranty | Terms of Use | Reporting Piracy