| Página Inicial | Contactos | Empleo |  
 

Datasheet

El lector de huellas dactilar “GV-GF Fingerprinter” puede trabajar con los Controladores y el Software GV-AS Manager para crear un sistema completo de control de acceso. Con el Lector GeoFinger individual se puede inscribir y administrar las tarjetas de usuario Mifare por medio de la Tarjeta Manager Enroll Card(Tarjeta para Inscripción) y Delete Card(Tarjeta para Eliminación).

FEATURES
  • Trabaja con GV-AS Controller y GV-ASManager
  • Sistema individual, no necesita cableado o PC
  • 3 modos: Solo Tarjeta, Solo Huella y Tarjeta con Huella
  • Huellas dactilares almacenadas en la tarjeta de usuario
  • 3 tipos de comunicación: Salida Wiegand 26, RS-485 y TCP/IP
  • Especificaciones
  • Accesorios
  • Contenido del Paquete

Modelos GV-GF1911 GV-GF1912
Instalación Solo uso interior
Interfaz de comunicación Wiegand 26, RS-485, TCP/IP (LAN)
Sensor Capacitivo Ópico
Alcance ( Alto x Ancho) 18 x 13 mm / 0.71 x 0.51 in 20 x 17 mm / 0.79 x 0.67 in
Modo de Operación Solo Tarjeta, Solo Huella y Tarjeta con Huella
Cantidad de huellas almacenadas 1,900 (Para el modo de SOLO HUELLA)
Tarjetas compatibles ISO14443A MIFARE Class, 13.56 MHz
Salida 1 Port (240V, 2.5A)
Alimentación DC 7.5V~12V, Máx 250mA
Temperatura de Operación 0~50° C / 32~122° F
Humedad 10%~90%
Dimensiones (Alto x Ancho x Largo) 130 x 54 x 43 mm /
5.12 x 2.13 x 1.69 in
130 x 54 x 38 mm /
5.12 x 2.13 x 1.50 in
Note:
1. For Card + Fingerpring mode, it is required to purcahse GeoVision's cards and tags to work with.
2. For data sychronization with GV-ASController and GV-ASManager through LAN, it only supports when the following controller firmware version and software version work together:
* GV-ASManager: V4.0 or later
* GV-AS100 / 110 / 120: V1.06 or later
* GV-AS400: V1.04 or later
* GV-AS210 / 810: V1.0 or later

GV-AS ID Card & GV-AS ID Tag For Card + Fingerprint Mode, the GV-AS ID F Card or GV-AS ID F Tag is required. For Card Only Mode, both the GV-AS ID F Card / Tag and the GV-AS ID Card / Tag are supported.
GV-HUB V2 The GV-Hub V2 adds four RS-232/RS-485 serial ports through the computer's USB port, allowing connection between the fingerprint reader and the computer.
GV-COM V2 The GV-COM V2 can convert the standard RS-232 signal, through USB connector, to RS-485 signal, allowing connection between the fingerprint reader and the computer.
GV-NET/IO Card The GV-NET/IO Card is a RS-485 / RS-232 interface converter that provides 4 inputs and 4 relay outputs. Using the GV-NET/IO Card, you can connect the fingerprint reader to the computer.
PC Service Package The package includes a USB cable for connecting the fingerprint reader to a computer and a reader mount to hold the reader for fingerprint enrollment.

  • Fingerprint reader
  • Data Cable (of 100 cm / 3.28 feet)
  • Manager Enroll Card
  • Manager Delete Card
  • Self-Tapping Screw (M3 x 6L) x 2
  • Self-Tapping Screw (M4 x 15L) x 3
  • Plastic Screw Anchor x 4
  • Buzzer Hole Plate
  • Security Torx
  • Software CD